Uniters Fabric Care Kit 225 ml

"Easy Cleaning"

Practical to use and ensures quick and easy cleaning without fading or staining.

“Easy to Clean” is a concept which allows for the cleaning of a seat in just minutes without having to remove the seat cover. This avoids the risk of marks and bleaching. It also allows for quick re-use thanks to a rapid drying within an hour.

The kit consists of:

• 225ml Fabric Cleaner
• 225ml Fabric Protector
• 1 bath mitt
• 1 sponge
  

Fabric Cleaner

Fabric Cleaner is a specific cleaner for most fibres: natural (except of pure wool and silk),
synthetic, blended fibres and microfibres. On average, the 225 ml spray is sufficient for cleaning 5 to 6 sofa seats; 10-15 m² fabrics.

Fabric Protector

Fabric Protector is a water based spray for protecting textiles, microfibres, carpets… against drink and food stains, fatty acids of perspiration, etc. Practical to use after cleaning or de-staining Fabric Protector can be applied directly to textiles while still-damp.

Fabric Cleaner

1. Shake the bottle well before use. Apply product to dampened cloth and test for colour-fastness on a hidden area of the seat.
2. At a distance of 30 cm, spray just enough product on the cover to make it slightly damp. Clean with the bath mitt dampened in luke warm water; rinse the bath mitt out when it becomes dirty.
3. Rinse repeatedly with the bath mitt to remove all dirt and all traces of the product. Dry with a clean hand towel.
4. In the case of stains, spray the product onto the sponge and dab the stains. Dry with an absorbent paper and then rinse following the instructions given in point 3.
5. Protect the cleaned area while still damp with
   Fabric Protector

N.B: Water marks, roughness and long drying times are all signs of insufficient rinsing. Rinse again if necessary.

Fabric Protector

1. Shake the bottle well before use and test colour-fastness on hidden area.
   
2. Spray the product at a distance of about 30 cm, treating wet or dry surface areas using a crisscross method; use a sponge to facilitate penetration of the product when applying to synthetics and microfibres, if necessary.
   
3. Allow to dry.